Kubota Skid Steer Post Driver Attachment
Overview
Kubota's skid steer post driver is available for SSV and SVL series machines and compatible with universal SSQA. Designed for fence crews and utility contractors installing posts efficiently. Kubota has dealer coverage across Canada for service and parts support on this attachment.
Canada Availability
Best for: fence post installation, T-posts, utility posts
Compare with: Berlon Skid Steer Post Driver · Blue Diamond Heavy-Duty Post Driver for Skid Steers · Blue Diamond Heavy-Duty Post Driver for Skid Steers
Key Facts
- Brand: Kubota Tractor Corporation
- Type: hydraulic post driver
- Drive: hydraulic percussion
- Mount: Kubota quick attach (SSQA compatible)
- Application: fence post installation, T-posts, utility posts
- Weight: 500–900 lbs
- Hydraulic flow: 8–20 GPM
Is This Right For You?
Buy if
- You install T-posts, U-posts, or round wood posts for farm fencing, property lines, or temporary enclosures
- Ground conditions are mixed — impact drivers work in clay, gravel, and rocky ground that vibratory can't penetrate
- You want to add fencing capability to your skid steer without a dedicated fence post machine
Skip if
- You install hundreds of posts per day — a vibratory driver is significantly faster in suitable soil conditions
- Large timber piles or structural posts are your main product — a heavy-duty driver handles that range better
Also consider
- Vibratory post driver for faster installation in soft to medium soils
- Heavy-duty post driver for large wood posts and difficult ground
Designed for Kubota machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About Kubota in Canada
Kubota attachments are available through the Kubota dealer network across Canada, which covers most provinces. If you run Kubota compact equipment, same-brand attachments provide the best hydraulic compatibility and your local dealer handles both machine and attachment support under one roof.
Care & Maintenance
- Grease all impact guide bushings and driver head fittings before every use — the impact energy transmits through these components on every blow
- Inspect driver cap or guide inserts after every session — worn or cracked guide caps split wood posts and bend T-posts, which then jam inside the driver tube
- Check hydraulic hose connections and the pressure accumulator (if equipped) before each use
- After work in clay or mud, clean the guide tube interior to prevent soil compaction that restricts post insertion and causes the posts to jam
- Inspect the impact guide rod monthly for scoring or deformation — a scored rod causes erratic impact energy and accelerated bushing wear
How to Connect
- Attach post driver using Bob-Tach
- Connect single-acting hydraulic circuit for hammer
- Set machine to single-action mode if available
- Test one light hammer stroke before driving at full force
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from Kubota
Kubota Skid Steer 4-in-1 Combination Bucket
Standard FlowKubota's 4-in-1 combination bucket is available for SSV and SVL series machines. Used by...
View product →
Kubota Skid Steer Angle Broom
Standard FlowThe wide-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product →
Kubota Skid Steer Auger Drive
Standard FlowThe wide-inch auger bit drills post holes, footings, and fence lines in Canadian soil...
View product →
Kubota Skid Steer Cement Mixer Attachment
Standard FlowKubota's skid steer cement mixer is designed for SSV and SVL series machines, using the...
View product →✓ Last checked: March 2026