Kubota Skid Steer Landplane
Overview
The wide-inch land plane grades gravel roads, laneways, and acreage driveways to a smooth, crowned finish. Kubota Canada dealer locations span every province, with factory-matched attachments and parts support. Front and rear scarifier shanks break up compacted material before the blade redistributes it evenly. Designed for skid steers and CTLs with universal SSQA mounting. Available through Kubota dealers across Canada.
Canada Availability
Best for: gravel road grading, surface levelling
Compare with: Berlon 72-Inch Land Plane for Skid Steers · Berlon 72 Inch Skid Steer Landplane · Berlon 96 Inch Skid Steer Landplane
Key Facts
- Brand: Kubota Tractor Corporation
- Type: landplane
- Drive: passive drum
- Mount: Kubota quick attach (SSQA compatible)
- Application: gravel road grading, surface levelling
- Weight: 500–1500 lbs
- Hydraulic flow: N/A - passive attachment
Is This Right For You?
Buy if
- You maintain gravel driveways, rural roads, acreage laneways, or field access roads with a skid steer
- Float mode is available on your machine — landplanes need to float to follow the contour of the ground
Skip if
- Your surface is hardpan or frozen — a land plane rides on top of hard surfaces and doesn't cut into them
- You need to move large volumes of material — a land plane redistributes existing material, it doesn't load and dump
Also consider
- Box blade for primary grading before final land plane pass
- Dozer blade if you need to push material rather than float and level
Designed for Kubota machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About Kubota in Canada
Kubota attachments are available through the Kubota dealer network across Canada, which covers most provinces. If you run Kubota compact equipment, same-brand attachments provide the best hydraulic compatibility and your local dealer handles both machine and attachment support under one roof.
Care & Maintenance
- Inspect the floating blade for wear — sharp edges level properly; a worn-smooth edge scrapes without cutting and leaves a rough surface
- Lubricate blade hinge and float mechanism pivot pins each season — seized float pivots defeat the purpose of the attachment
- Check scarifier shanks for tooth wear or breakage before each use — a missing shank puts lateral load on adjacent shanks and the boom
- After use in mud or clay, clean accumulated material from the blade housing — dried clay adds uneven weight and prevents proper floating
- Inspect blade-mounting welds for cracking at season start — the float mechanism amplifies vertical stress on the mounting hardware over time
How to Connect
- Attach frame using Bob-Tach
- Connect hydraulic tilt circuit if equipped (some are passive/manual)
- Set cutting angle before working (typically 0-5° for finish grade)
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from Kubota
Kubota Skid Steer 4-in-1 Combination Bucket
Standard FlowKubota's 4-in-1 combination bucket is available for SSV and SVL series machines. Used by...
View product →
Kubota Skid Steer Angle Broom
Standard FlowThe wide-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product →
Kubota Skid Steer Auger Drive
Standard FlowThe wide-inch auger bit drills post holes, footings, and fence lines in Canadian soil...
View product →
Kubota Skid Steer Cement Mixer Attachment
Standard FlowKubota's skid steer cement mixer is designed for SSV and SVL series machines, using the...
View product →✓ Last checked: March 2026