John Deere Worksite Pro LP96 Landplane
Overview
The LP96 is John Deere's widest production land plane in the Worksite Pro line at 96 inches — a tool for large-frame machines covering significant area on large acreages, commercial properties, and rural road maintenance. The front-and-rear cutting edge system allows controlled grading in both directions, and the floating blade design means the unit follows the existing ground rather than cutting to a rigid height — which is exactly right for driveway and road finish work where you're following existing grade. No auxiliary hydraulics needed. At this width, Canadian rural contractors can cover 8 feet per pass, which adds up quickly on long driveways and private road networks.
Canada Availability
Best for: large acreage driveways, rural road networks, commercial property lanes
Compare with: Berlon 96 Inch Skid Steer Landplane · Blue Diamond 108-Inch Land Plane for Skid Steers · Blue Diamond 84-Inch Land Plane for Skid Steers
Key Facts
- Working width: 96 inches
- Front and rear cutting edges — grade in forward or reverse
- Floating blade system: follows existing grade rather than cutting flat
- No auxiliary hydraulics required
- Application: large acreage driveways, rural road networks, commercial property lanes
- Requires large-frame skid steer or CTL
- SSQA (universal quick attach) mount
Is This Right For You?
Buy if
- You maintain gravel driveways, rural roads, acreage laneways, or field access roads with a skid steer
- Float mode is available on your machine — landplanes need to float to follow the contour of the ground
Skip if
- Your surface is hardpan or frozen — a land plane rides on top of hard surfaces and doesn't cut into them
- You need to move large volumes of material — a land plane redistributes existing material, it doesn't load and dump
Also consider
- Box blade for primary grading before final land plane pass
- Dozer blade if you need to push material rather than float and level
Compatible with compact track loaders and large-frame skid steers (S750+ class). Verify your machine's rated operating capacity (ROC) before ordering.
About John Deere in Canada
John Deere attachments are available through an extensive Canadian dealer network, ensuring local service, parts availability, and warranty support coast to coast. Designed to pair with JD machines but compatible with any skid steer via universal quick attach.
Care & Maintenance
- Inspect the floating blade for wear — sharp edges level properly; a worn-smooth edge scrapes without cutting and leaves a rough surface
- Lubricate blade hinge and float mechanism pivot pins each season — seized float pivots defeat the purpose of the attachment
- Check scarifier shanks for tooth wear or breakage before each use — a missing shank puts lateral load on adjacent shanks and the boom
- After use in mud or clay, clean accumulated material from the blade housing — dried clay adds uneven weight and prevents proper floating
- Inspect blade-mounting welds for cracking at season start — the float mechanism amplifies vertical stress on the mounting hardware over time
How to Connect
- Attach frame using Bob-Tach
- Connect hydraulic tilt circuit if equipped (some are passive/manual)
- Set cutting angle before working (typically 0-5° for finish grade)
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from John Deere
John Deere Worksite Pro 4-in-1 Combination Bucket
Standard FlowJohn Deere's Worksite Pro 4-in-1 bucket is a hydraulic combination attachment for John...
View product →
John Deere AB60B 60 Inch Skid Steer Angle Broom
Standard FlowThe 60-inch-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product → John Deere AB72B 72 Inch Angle Broom
Standard FlowThe 72-inch-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product →
John Deere 30-Inch Auger for Skid Steers in Canada
Standard FlowThe 30-inch-inch auger bit drills post holes, footings, and fence lines in Canadian soil...
View product →✓ Last checked: March 2026