Rammer S82 Hydraulic Breaker

Name: Rammer S82 Hydraulic Breaker
Brand: Rammer
SKU: rammer-s82-hydraulic-breaker
Availability: InStock

Mid

Standard Flow

Runs on standard auxiliary flowToo heavy for most small-frame machinesBest on mid-frame or large-frame machines

View on rammer.com →

Rammer S82 hydraulic breaker skid steer attachment

Overview

The Rammer S82 Hydraulic Breaker demolishes concrete slabs, asphalt, rock faces, and frozen ground that buckets cannot penetrate. Rammer attachments are available through Canadian equipment dealers and distributors. Impact energy and blow rate determine performance on hard material; match the breaker class to your machine's auxiliary hydraulic output. Used extensively on Canadian construction and utility sites. Available through Rammer/Sandvik dealers in Canada.

Canada Availability

Available through Rammer/Sandvik dealers in Canada.

Best for: heavy demolition, hard rock, reinforced concrete

Compare with: Atlas Copco SB 102 Hydraulic Breaker (Legacy) · Berlon Industries Skid Steer Hydraulic Breaker · Blue Diamond Skid Steer Hydraulic Breaker

Key Facts

Model: Rammer S82
Brand: Rammer (Sandvik Group)
Type: heavy-duty hydraulic breaker, G-Dampening
Class: large-frame
Application: heavy demolition, hard rock, reinforced concrete
Weight: 1200–2000 lbs
Hydraulic flow: 8–20 GPM

✓ Specs sourced from rammer.com · Last verified: March 2026

View on rammer.com →

Is This Right For You?

Buy if

You break large reinforced concrete foundations, thick rock, or concrete retaining walls regularly
Your skid steer is a large-frame machine (80+ HP) rated for a heavy hammer attachment
Production rate matters — heavy-duty breakers complete demolition jobs significantly faster than medium class

Skip if

Your machine is medium-frame or smaller — a heavy breaker can exceed carrier weight class limits and damage hydraulics
Occasional light demolition is your only use — a medium-duty breaker handles that range at lower cost

Also consider

Medium-duty hydraulic breaker for smaller machines and occasional demolition
Light-duty breaker for compact machines doing concrete curb or small slab work

Machine Compatibility

Best suited to large-frame machines (S750+ class or equivalent CTL). Verify your machine's rated operating capacity (ROC) before ordering.

About Rammer in Canada

Rammer is a Finnish manufacturer of hydraulic breakers (part of the Sandvik group) and one of the most recognized names in professional demolition and construction tooling. Rammer breakers are available through authorized dealers in Canada with support from Sandvik's national service network.

Care & Maintenance

Check nitrogen buffer gas pressure at the start of every season and whenever impact energy feels reduced — low gas pressure is the most common cause of reduced performance
Lubricate the tool (chisel) bushing and retainer pins before every use — dry bushings accelerate side-loading wear on both the bushing and the tool shank
Inspect the lower bushing for wear after every 40 hours — a worn bushing allows chisel wobble, reducing impact energy delivery and accelerating shank wear
Never blank-fire the breaker — operating without material contact destroys the internal valve in minutes; this is the most common cause of breaker failures
Verify return-line back-pressure annually — back-pressure exceeding the breaker's rated limit destroys the valve seal progressively and may not be immediately obvious