John Deere Worksite Pro RR72 Root Rake
Overview
John Deere's Worksite Pro RR72 is a 72-inch root rake optimized for John Deere G- and E-Series skid steers and compact track loaders as well as K-Series compact wheel loaders. The large tine spacing lets operators gather rocks and debris while leaving fine soil behind — ideal for land clearing, brush pile cleanup, and post-construction site prep. Available through Brandt and other John Deere dealers across Canada.
Canada Availability
Best for: land clearing, brush cleanup, rock removal, post-construction site prep
Compare with: Berlon 66 Inch Grapple Bucket · Berlon Industries 72-Inch Grapple Bucket for Skid Steers · Berlon 78 Inch Grapple Bucket
Key Facts
- Model: RR72
- Working width: 72 inches
- Tine design: large spacing for debris retention, soil pass-through
- Application: land clearing, brush cleanup, rock removal, post-construction site prep
- Optimized for: John Deere G- and E-Series skid steers/CTLs, K-Series compact wheel loaders
- Compatible with most major skid steer brands
- Typical weight: 500–650 lbs
- Hydraulic flow: 15–25 GPM (standard flow) for open/close cylinders
Is This Right For You?
Buy if
- You clear brush, saplings, slash, and debris that a bucket can't grip
- You work on land clearing, right-of-way maintenance, or post-harvest cleanup
Skip if
- You move dense solid loads like rock, sand, or gravel — a grapple loses material through the tines
- Your primary task is loading trucks — a GP bucket is faster for dense material
Also consider
- Industrial grapple if you also handle large rocks or demolition debris
- Stump grinder if stump removal is part of the job
Designed for John Deere machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About John Deere in Canada
John Deere attachments are available through an extensive Canadian dealer network, ensuring local service, parts availability, and warranty support coast to coast. Designed to pair with JD machines but compatible with any skid steer via universal quick attach.
Care & Maintenance
- Grease all pivot points every 8 hours of operation — this single habit extends service life more than any other maintenance step
- Inspect tines for bending or cracking after use in rock or demolition debris — bent tines cause uneven closing force and can fail under load
- Check hydraulic hose connections and fittings weekly — grapple hoses take more abuse than most attachments due to constant jaw cycling near rough material
- Inspect cylinder pins and bushings monthly; sloppiness in the jaws indicates worn bushings, not just general age — replace before the pin starts wearing the bore
- Store with jaws closed to reduce stress on the frame and keep the hinge pivot pins from accumulating debris
How to Connect
- Mount using same Bob-Tach process as buckets
- Connect hydraulic couplers (depressurized — release aux hydraulics first)
- Verify open/close direction at idle before working
- Test grapple open/close 3× before lifting any load
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from John Deere
John Deere Worksite Pro 4-in-1 Combination Bucket
Standard FlowJohn Deere's Worksite Pro 4-in-1 bucket is a hydraulic combination attachment for John...
View product →
John Deere AB60B 60 Inch Skid Steer Angle Broom
Standard FlowThe 60-inch-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product → John Deere AB72B 72 Inch Angle Broom
Standard FlowThe 72-inch-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product →
John Deere 30-Inch Auger for Skid Steers in Canada
Standard FlowThe 30-inch-inch auger bit drills post holes, footings, and fence lines in Canadian soil...
View product →✓ Last checked: March 2026