HLA 84-Inch Scrap Grapple Bucket for Skid Steers
Overview
HLA Attachments' 84-inch scrap grapple bucket for skid steers handles large-volume demolition debris and scrap metal on large-frame machines. The wider 84-inch format grabs more material per cycle — useful on commercial demolition and recycling sites where throughput matters. Ontario-built to HLA's heavy duty commercial standard.
Canada Availability
Best for: demolition, scrap metal, industrial waste — large machines
Compare with: Berlon Industries 72-Inch Grapple Bucket for Skid Steers · Berlon 78 Inch Grapple Bucket · Berlon 84-Inch Heavy-Duty Root Grapple
Key Facts
- Working width: 84 inches
- Type: scrap grapple bucket — heavy duty
- Application: demolition, scrap metal, industrial waste — large machines
- Dual hydraulic cylinders
- SSQA skid steer quick attach mount
- Typical weight: 600–780 lbs
- Hydraulic flow: 15–25 GPM (standard flow) for open/close cylinders
Is This Right For You?
Buy if
- You need more versatility than a bucket — grab, hold, and move irregular loads
- You clear brush, debris, or demolition material where a bucket loses control of the load
Skip if
- Dense, uniform material (gravel, sand, soil) is better handled by a GP bucket with more capacity per cycle
- The grapple weight would push you near your machine's ROC limit with this load type
Also consider
- GP bucket for high-volume dense material work
- Root grapple for brush-heavy clearing jobs
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.
About HLA in Canada
HLA Attachments is an Ontario-based manufacturer that designs and builds attachments in Waterloo, ON, with a dealer network spanning all provinces. Backed by a Canadian warranty and local parts availability, HLA is one of the most trusted names on Canadian job sites.
Care & Maintenance
- Grease all pivot points every 8 hours of operation — this single habit extends service life more than any other maintenance step
- Inspect tines for bending or cracking after use in rock or demolition debris — bent tines cause uneven closing force and can fail under load
- Check hydraulic hose connections and fittings weekly — grapple hoses take more abuse than most attachments due to constant jaw cycling near rough material
- Inspect cylinder pins and bushings monthly; sloppiness in the jaws indicates worn bushings, not just general age — replace before the pin starts wearing the bore
- Store with jaws closed to reduce stress on the frame and keep the hinge pivot pins from accumulating debris
How to Connect
- Mount using same Bob-Tach process as buckets
- Connect hydraulic couplers (depressurized — release aux hydraulics first)
- Verify open/close direction at idle before working
- Test grapple open/close 3× before lifting any load
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from HLA
HLA 3230 Snow Wing Blade 8 to 13-Foot Skid Steer
Standard FlowHLA's 3230 Snow Wing is a hydraulic wing snow blade that expands from 8 to 13 feet wide...
View product → HLA 3230 Snow Wing Blade 9 to 14-Foot Skid Steer
Standard FlowThe HLA 3230 Snow Wing in the 9-to-14-foot size class is suitable for larger skid steers...
View product →
HLA 108-Inch 4-Way Dozer Blade for Large Skid Steers
Standard FlowHLA Attachments' 108-inch 4-way dozer blade is for large-frame skid steers and CTLs doing...
View product → HLA 72-Inch 4-Way Dozer Blade for Skid Steers
Standard FlowHLA Attachments' 72-inch 4-way hydraulic dozer blade provides angle, tilt, and straight...
View product →✓ Last checked: March 2026