HLA 72-Inch Scrap Grapple Bucket for Skid Steers
Overview
HLA Attachments' scrap grapple bucket is designed for demolition debris, scrap metal, and mixed industrial waste handling on skid steers. As an Ontario-made product from Horst Welding, it's built to handle the abuse of demolition sites and recycling yards — heavier steel and reinforced tines compared to standard grapple buckets. Suitable for Canadian construction, demo, and recycling operations.
Canada Availability
Best for: demolition debris, scrap metal, industrial waste
Compare with: Berlon 66 Inch Grapple Bucket · Berlon Industries 72-Inch Grapple Bucket for Skid Steers · Berlon 78 Inch Grapple Bucket
Key Facts
- Working width: 72 inches
- Type: scrap grapple bucket — heavy duty
- Application: demolition debris, scrap metal, industrial waste
- Dual hydraulic cylinders
- Reinforced tines for heavy-duty use
- SSQA skid steer quick attach mount
- Typical weight: 500–650 lbs
- Hydraulic flow: 15–25 GPM (standard flow) for open/close cylinders
Is This Right For You?
Buy if
- You need more versatility than a bucket — grab, hold, and move irregular loads
- You clear brush, debris, or demolition material where a bucket loses control of the load
Skip if
- Dense, uniform material (gravel, sand, soil) is better handled by a GP bucket with more capacity per cycle
- The grapple weight would push you near your machine's ROC limit with this load type
Also consider
- GP bucket for high-volume dense material work
- Root grapple for brush-heavy clearing jobs
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.
About HLA in Canada
HLA Attachments is an Ontario-based manufacturer that designs and builds attachments in Waterloo, ON, with a dealer network spanning all provinces. Backed by a Canadian warranty and local parts availability, HLA is one of the most trusted names on Canadian job sites.
Care & Maintenance
- Grease all pivot points every 8 hours of operation — this single habit extends service life more than any other maintenance step
- Inspect tines for bending or cracking after use in rock or demolition debris — bent tines cause uneven closing force and can fail under load
- Check hydraulic hose connections and fittings weekly — grapple hoses take more abuse than most attachments due to constant jaw cycling near rough material
- Inspect cylinder pins and bushings monthly; sloppiness in the jaws indicates worn bushings, not just general age — replace before the pin starts wearing the bore
- Store with jaws closed to reduce stress on the frame and keep the hinge pivot pins from accumulating debris
How to Connect
- Mount using same Bob-Tach process as buckets
- Connect hydraulic couplers (depressurized — release aux hydraulics first)
- Verify open/close direction at idle before working
- Test grapple open/close 3× before lifting any load
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from HLA
HLA 3230 Snow Wing Blade 8 to 13-Foot Skid Steer
Standard FlowHLA's 3230 Snow Wing is a hydraulic wing snow blade that expands from 8 to 13 feet wide...
View product → HLA 3230 Snow Wing Blade 9 to 14-Foot Skid Steer
Standard FlowThe HLA 3230 Snow Wing in the 9-to-14-foot size class is suitable for larger skid steers...
View product →
HLA 108-Inch 4-Way Dozer Blade for Large Skid Steers
Standard FlowHLA Attachments' 108-inch 4-way dozer blade is for large-frame skid steers and CTLs doing...
View product → HLA 72-Inch 4-Way Dozer Blade for Skid Steers
Standard FlowHLA Attachments' 72-inch 4-way hydraulic dozer blade provides angle, tilt, and straight...
View product →✓ Last checked: March 2026