Blue Diamond 96-Inch Root Grapple for Skid Steers

Premium
Standard Flow
Runs on standard auxiliary flowFits most skid steers, including small-frame
View on bluediamondattachments.com →
Blue Diamond 96-Inch Root Grapple for Skid Steers

Overview

The Blue Diamond 96-inch Root Grapple is a wide-span heavy-duty hydraulic grapple for high-volume land clearing, debris piling, and brush management on large-frame CTLs. Solid one-piece steel tines, heavy structural tube frame, dual independent hydraulic clamps, and protected hose routing. Suited for 50+ HP machines on commercial clearing sites. Backed by Blue Diamond's 1-year warranty. Available through Blue Diamond's Canadian dealer network.

Canada Availability

Available in Canada through Blue Diamond's Canadian dealer network.

Key Facts

  • Working width: 96 inches
  • Type: root grapple
  • Drive: hydraulic
  • Application: brush, stumps, land clearing
  • Mount: universal SSQA
  • Typical weight: 750–950 lbs
  • Hydraulic flow: 15–25 GPM (standard flow) for open/close cylinders
Specs sourced from bluediamondattachments.com · Last verified: March 2026

Is This Right For You?

Buy if

  • You clear brush, saplings, slash, and debris that a bucket can't grip
  • You work on land clearing, right-of-way maintenance, or post-harvest cleanup

Skip if

  • You move dense solid loads like rock, sand, or gravel — a grapple loses material through the tines
  • Your primary task is loading trucks — a GP bucket is faster for dense material

Also consider

  • Industrial grapple if you also handle large rocks or demolition debris
  • Stump grinder if stump removal is part of the job
Machine Compatibility

Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Best suited to large-frame machines (S750+ class or equivalent CTL).

About Blue Diamond in Canada

Blue Diamond Attachments manufactures in the USA and distributes widely into Canada. Known for heavy-duty construction and a broad catalog, Blue Diamond is a go-to brand for contractors who want North American-made quality.

Care & Maintenance

  • Grease all pivot points every 8 hours of operation — this single habit extends service life more than any other maintenance step
  • Inspect tines for bending or cracking after use in rock or demolition debris — bent tines cause uneven closing force and can fail under load
  • Check hydraulic hose connections and fittings weekly — grapple hoses take more abuse than most attachments due to constant jaw cycling near rough material
  • Inspect cylinder pins and bushings monthly; sloppiness in the jaws indicates worn bushings, not just general age — replace before the pin starts wearing the bore
  • Store with jaws closed to reduce stress on the frame and keep the hinge pivot pins from accumulating debris

How to Connect

  1. Mount using same Bob-Tach process as buckets
  2. Connect hydraulic couplers (depressurized — release aux hydraulics first)
  3. Verify open/close direction at idle before working
  4. Test grapple open/close 3× before lifting any load
Safety NoteConnect hydraulic lines before mounting to machine where possible

Ready to Buy in Canada?

Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.

Find a Dealer Near You →

✓ Last checked: March 2026