John Deere DB84B 84 Inch Dozer Blade
Overview
The John Deere DB84B is an 84-inch dozer blade in the Worksite Pro attachment line for full-size John Deere skid steers. Used for grading, pushing, and site levelling on Canadian construction and farm sites. Available through Brandt and John Deere dealers across Canada.
Canada Availability
Compare with: Berlon Industries 84-Inch Dozer Blade for Skid Steers · Berlon 96 Inch Skid Steer Dozer Blade · Blue Diamond 72-Inch 6-Way Skid Steer Dozer Blade
Key Facts
- Model: John Deere DB84B
- Series: Worksite Pro
- Working width: 84 inches
- Type: hydraulic dozer blade
- Drive: hydraulic float and angle
- Mount: John Deere quick attach (SSQA compatible)
- Weight: 475–1400 lbs
- Hydraulic flow: 10–20 GPM
Is This Right For You?
Buy if
- You push material forward in a straight line: stockpile cleanup, rough site clearing, or road building
- You need basic grading on unpaved surfaces and already own or operate a skid steer
Skip if
- Angle control or cast direction matters — a 4-way or 6-way blade is worth the upgrade for that work
- Finish grading is your goal — a box blade or land plane gives you far more control of the final surface
Also consider
- 4-way or 6-way dozer blade if you need angle control
- Box blade or land plane if finish grading is the primary task
Designed for John Deere machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About John Deere in Canada
John Deere attachments are available through an extensive Canadian dealer network, ensuring local service, parts availability, and warranty support coast to coast. Designed to pair with JD machines but compatible with any skid steer via universal quick attach.
Care & Maintenance
- Grease all hydraulic cylinder pin fittings before every use session — dry pins accelerate wear in the cylinder bores and cause premature side-loading
- Inspect the cutting edge for wear or deformation after hard use — replace bolt-on edges when worn to avoid transferring impact to the blade frame
- Check hydraulic coupler connections for leaks weekly — dozer blade circuits cycle frequently and coupler seals wear faster than on less-cycled attachments
- Inspect tilt and angle cylinder rod seals for leaks after use in abrasive or sandy soil — grit scoring a rod seal causes accelerating internal leakage
- Clean the blade face and frame before storage — mud pockets hold moisture against bare steel and cause rust pitting during off-season storage
How to Connect
- Attach blade frame to Bob-Tach
- If 6-way blade: connect tilt and angle hydraulic circuits (both sides)
- Test all blade movements (up/down, tilt left/right, angle) before working
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from John Deere
John Deere Worksite Pro 4-in-1 Combination Bucket
Standard FlowJohn Deere's Worksite Pro 4-in-1 bucket is a hydraulic combination attachment for John...
View product →
John Deere AB60B 60 Inch Skid Steer Angle Broom
Standard FlowThe 60-inch-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product → John Deere AB72B 72 Inch Angle Broom
Standard FlowThe 72-inch-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product →
John Deere 30-Inch Auger for Skid Steers in Canada
Standard FlowThe 30-inch-inch auger bit drills post holes, footings, and fence lines in Canadian soil...
View product →✓ Last checked: March 2026