John Deere Worksite Pro DB108 Dozer Blade
Overview
The DB108 is a 108-inch (9-foot) straight dozer blade in John Deere's Worksite Pro line — designed for large-frame skid steers doing heavy site prep, road building, and backfill work. At 9 feet, it moves substantial material in each pass and spans wider than the machine's tracks, making it efficient for rough grading large pads. The blade oscillates 5 degrees left or right for basic material management. Dozer blades are for pushing and rough grading — they are not designed for snow plowing (use a snow blade for that). Canadian oilfield, road building, and construction contractors use the DB108 for cut-and-fill work and large site clearing where a GP bucket isn't efficient.
Canada Availability
Best for: site prep, rough grading, cut-and-fill, road building, large pad construction
Compare with: Berlon 96 Inch Skid Steer Dozer Blade · Blue Diamond 96-Inch Dozer Blade for Skid Steers · Blue Diamond 96-Inch Dozer Blade for Skid Steers
Key Facts
- Width: 108 inches (9 feet)
- Blade oscillation: 5 degrees left or right
- Application: site prep, rough grading, cut-and-fill, road building, large pad construction
- Not designed for snow plowing — use a snow blade for snow work
- No auxiliary hydraulics required for basic operation
- SSQA (universal quick attach) mount
- Compatible with large-frame John Deere skid steers, CTLs, and compact wheel loaders
Is This Right For You?
Buy if
- You need to push loose material, level rough grade, or backfill trenches on your own property or job sites
- The skid steer you already own can replace a dedicated dozer for light earthwork
Skip if
- Finish grading quality matters — a GP bucket backscraping often beats a blade for precision
- Trenching or digging is involved — a blade can't dig, only push
Also consider
- Box blade or land plane for finish grading work
- GP bucket for combined digging and moving
Compatible with compact track loaders and large-frame skid steers (S750+ class). Verify your machine's rated operating capacity (ROC) before ordering.
About John Deere in Canada
John Deere attachments are available through an extensive Canadian dealer network, ensuring local service, parts availability, and warranty support coast to coast. Designed to pair with JD machines but compatible with any skid steer via universal quick attach.
Care & Maintenance
- Grease all hydraulic cylinder pin fittings before every use session — dry pins accelerate wear in the cylinder bores and cause premature side-loading
- Inspect the cutting edge for wear or deformation after hard use — replace bolt-on edges when worn to avoid transferring impact to the blade frame
- Check hydraulic coupler connections for leaks weekly — dozer blade circuits cycle frequently and coupler seals wear faster than on less-cycled attachments
- Inspect tilt and angle cylinder rod seals for leaks after use in abrasive or sandy soil — grit scoring a rod seal causes accelerating internal leakage
- Clean the blade face and frame before storage — mud pockets hold moisture against bare steel and cause rust pitting during off-season storage
How to Connect
- Attach blade frame to Bob-Tach
- If 6-way blade: connect tilt and angle hydraulic circuits (both sides)
- Test all blade movements (up/down, tilt left/right, angle) before working
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from John Deere
John Deere Worksite Pro 4-in-1 Combination Bucket
Standard FlowJohn Deere's Worksite Pro 4-in-1 bucket is a hydraulic combination attachment for John...
View product →
John Deere AB60B 60 Inch Skid Steer Angle Broom
Standard FlowThe 60-inch-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product → John Deere AB72B 72 Inch Angle Broom
Standard FlowThe 72-inch-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product →
John Deere 30-Inch Auger for Skid Steers in Canada
Standard FlowThe 30-inch-inch auger bit drills post holes, footings, and fence lines in Canadian soil...
View product →✓ Last checked: March 2026