HLA 60-Inch GP Bucket — Available Through TAG Equipment

Mid
No hydraulics requiredFits most skid steers, including small-frame
View on tagequipment.com →
HLA GP Bucket 60 Inch Skid Steer

Overview

The HLA 60-inch general purpose bucket is a compact skid steer bucket for tight jobsite work — material handling, farm cleanups, and small earthmoving jobs. Ontario-manufactured by Horst Welding (HLA Attachments), it features a bolt-on replaceable cutting edge and standard SSQA mount. The 60-inch width suits compact and small mid-frame skid steers where the more common 72-inch model would be too wide. A domestically manufactured Canadian option. Available through TAG Equipment, an authorized HLA dealer in Mississauga, Ontario.

Canada Availability

Available in Canada through TAG Equipment — an authorized HLA Attachments dealer.

Key Facts

  • Working width: 60 inches
  • Application: farm, construction, general material
  • Cutting edge: replaceable
  • Mount: universal SSQA
  • Typical weight: 350–450 lbs (varies by manufacturer)
  • Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
Specs sourced from tagequipment.com · Last verified: March 2026

Is This Right For You?

Buy if

  • You need one versatile bucket for gravel, soil, concrete chunks, and general debris
  • Your machine is mid-frame (S450–S650 class) or CTL

Skip if

  • You work primarily in rock, frozen ground, or heavy demolition — a rock bucket handles that better
  • You need clamshell/4-in-1 functionality

Also consider

  • Rock bucket if your primary work is shot rock or frozen ground
  • 4-in-1 (multipurpose) bucket if you also need occasional grading or clamshell action
Machine Compatibility

Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.

About HLA in Canada

HLA Attachments is an Ontario-based manufacturer that designs and builds attachments in Waterloo, ON, with a dealer network spanning all provinces. Backed by a Canadian warranty and local parts availability, HLA is one of the most trusted names on Canadian job sites.

Care & Maintenance

  • Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
  • Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
  • Check coupler latch engagement before every use — a partially latched bucket can release under load
  • Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
  • Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late

How to Connect

  1. Position bucket face-down on ground
  2. Drive forward into Bob-Tach receiver arms
  3. Pull both lock handles to engage
  4. Verify orange indicators show LOCKED
  5. Test lift 6 inches — do not drive until confirmed locked
Safety NoteBob-Tach / Bob-Lock verification is critical — look for orange indicator pins fully engaged

Ready to Buy in Canada?

Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.

Find a Dealer Near You →

✓ Last checked: March 2026