John Deere Worksite Pro CB72 Construction Bucket
Overview
The CB72 is one of the most popular heavy-duty buckets in the Worksite Pro lineup — 72 inches wide at 475 lb, it's right-sized for full-frame skid steers doing serious construction work. The low back plate improves operator visibility when working close to grade or in tight spaces, and the rounded interior moves material cleanly through fill and dump cycles without hangups. Pre-drilled for a bolt-on cutting edge or tooth bar so you can spec it for the job. Standard choice for earthmoving contractors, site prep crews, and utility operators running larger machines.
Canada Availability
Best for: general construction, loading, grading, material handling
Compare with: Berlon 60-Inch General Purpose Bucket for Skid Steers · Berlon 84-Inch GP Bucket for Skid Steers · Berlon 72-Inch Heavy-Duty Smooth-Edge Skid Steer Bucket
Key Facts
- Working width: 72 inches (183 cm)
- Application: general construction, loading, grading, material handling
- Weight: 475 lb
- Material: mild steel construction
- Low back plate for improved operator visibility
- Rounded interior for better fill and dump performance
- Pre-drilled for cutting edge and tooth bar
- SSQA (universal skid steer quick attach) mount
- Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
Is This Right For You?
Buy if
- You break and move rock, frozen ground, or heavy demolition debris regularly
- You need a bolt-on cutting edge that's replaceable when worn
Skip if
- Your work is mostly topsoil, gravel, and light debris — a GP bucket is lighter and faster
- You need a wider bucket — rock buckets max out around 84 inches for most machines
Also consider
- GP bucket for general-purpose daily work
- Skeleton (rock sieve) bucket if you need to separate fines from rock
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About John Deere in Canada
John Deere attachments are available through an extensive Canadian dealer network, ensuring local service, parts availability, and warranty support coast to coast. Designed to pair with JD machines but compatible with any skid steer via universal quick attach.
Care & Maintenance
- Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
- Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
- Check coupler latch engagement before every use — a partially latched bucket can release under load
- Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
- Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late
How to Connect
- Position bucket face-down on ground
- Drive forward into Bob-Tach receiver arms
- Pull both lock handles to engage
- Verify orange indicators show LOCKED
- Test lift 6 inches — do not drive until confirmed locked
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
Berlon 72-Inch Root Grapple
Standard FlowBerlon's 72-inch root grapple weighs 770 lbs and handles brush clearing, acreage cleanup,...
View product →
Bobcat Bale Fork Attachment for Skid Steers
Bobcat's bale fork attachment handles round bales with four heavy spears rated for large...
View product →More from John Deere
John Deere AB60B 60 Inch Skid Steer Angle Broom
Standard FlowThe 60-inch-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product → John Deere AB72B 72 Inch Angle Broom
Standard FlowThe 72-inch-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product →
John Deere 30-Inch Auger for Skid Steers in Canada
Standard FlowThe 30-inch-inch auger bit drills post holes, footings, and fence lines in Canadian soil...
View product → John Deere 36-Inch Auger for Skid Steers in Canada
High FlowThe 36-inch-inch auger bit drills post holes, footings, and fence lines in Canadian soil...
View product →✓ Last checked: March 2026