IronBull 96-Inch Snow Bucket for Skid Steers
Overview
The IronBull 96-inch snow bucket is one of the widest snow buckets in their lineup, intended for large skid steers handling commercial and industrial snow clearing operations. The 8-foot opening clears wide paths on parking lots, warehouse aprons, and roadways efficiently. Available direct from IronBull Canada with free shipping to all provinces.
Canada Availability
Best for: large commercial lots, warehouse aprons, industrial sites
Compare with: Berlon 84-Inch GP Bucket for Skid Steers · Berlon 96-Inch General Purpose Bucket for Large Skid Steers · Berlon 84-Inch Heavy-Duty Tooth Skid Steer Bucket
Key Facts
- Working width: 96 inches (8 feet)
- Type: snow / high-capacity bucket
- Design: high-wall construction for maximum snow volume
- Application: large commercial lots, warehouse aprons, industrial sites
- Mount: universal skid steer quick attach (SSQA)
- Typical weight: 600–800 lbs (varies by manufacturer)
- Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
Is This Right For You?
Buy if
- You move high-volume, low-density material: mulch, wood chips, snow, or loose compost
- You want more cubic yards per pass without exceeding your machine's weight limit
Skip if
- Your material is heavy (gravel, soil, rock) — the thin bucket walls will wear fast
- You need a bucket that doubles for digging or grading
Also consider
- GP bucket if you split time between light and heavy material
- Snow pusher if snow moving is your primary winter task
Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.
About IronBull in Canada
IronBull attachments are distributed across Canada through online and dealer channels, offering competitive pricing on workhorse models suited to farm, construction, and municipal use.
Care & Maintenance
- Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
- Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
- Check coupler latch engagement before every use — a partially latched bucket can release under load
- Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
- Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late
How to Connect
- Position bucket face-down on ground
- Drive forward into Bob-Tach receiver arms
- Pull both lock handles to engage
- Verify orange indicators show LOCKED
- Test lift 6 inches — do not drive until confirmed locked
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
TMG-SG48 48-Inch Root Grapple for Skid Steers
Standard FlowThe TMG-SG48 is a 48-inch skeleton grapple for compact and mini skid steers. Twin...
View product →
JCB Skid Steer Pallet Forks
The JCB Skid Steer Pallet Forks handles palletized loads, lumber bundles, and baled...
View product →More from IronBull
IronBull 72-Inch Angle Broom Skid Steer
Standard FlowIronBull Canada's 72-inch angle broom sweeps and angles material to the side on job sites,...
View product →
IronBull 12-Inch Auger Bit for Skid Steers
High FlowIronBull's 12-inch auger bit is one of the most popular sizes for skid steer auger...
View product → IronBull 18-Inch Auger Bit for Skid Steers
High FlowIronBull's 18-inch auger bit is a large-diameter drilling attachment for skid steers used...
View product → IronBull 24-Inch Auger Bit for Skid Steers
High FlowThe 24-inch-inch auger bit drills post holes, footings, and fence lines in Canadian soil...
View product →✓ Last checked: March 2026