IronBull 84-Inch Rock Bucket for Skid Steers
Overview
The IronBull 84-inch rock bucket features tines or bars instead of a solid floor, allowing soil to sift out while retaining rocks and heavy debris. This design makes it efficient for rock picking, demolition cleanup, and clearing stony terrain on Canadian farms and construction sites. Available direct from IronBull Canada with free shipping nationwide.
Canada Availability
Best for: rock picking, demolition debris, land clearing
Compare with: Berlon 84-Inch GP Bucket for Skid Steers · Berlon 96-Inch General Purpose Bucket for Large Skid Steers · Berlon 72-Inch Heavy-Duty Smooth-Edge Skid Steer Bucket
Key Facts
- Working width: 84 inches
- Type: rock / skeleton bucket
- Design: open tine or bar construction for soil separation
- Application: rock picking, demolition debris, land clearing
- Mount: universal skid steer quick attach (SSQA)
- Typical weight: 520–680 lbs (varies by manufacturer)
- Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
Is This Right For You?
Buy if
- You break and move rock, frozen ground, or heavy demolition debris regularly
- You need a bolt-on cutting edge that's replaceable when worn
Skip if
- Your work is mostly topsoil, gravel, and light debris — a GP bucket is lighter and faster
- You need a wider bucket — rock buckets max out around 84 inches for most machines
Also consider
- GP bucket for general-purpose daily work
- Skeleton (rock sieve) bucket if you need to separate fines from rock
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About IronBull in Canada
IronBull attachments are distributed across Canada through online and dealer channels, offering competitive pricing on workhorse models suited to farm, construction, and municipal use.
Care & Maintenance
- Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
- Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
- Check coupler latch engagement before every use — a partially latched bucket can release under load
- Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
- Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late
How to Connect
- Position bucket face-down on ground
- Drive forward into Bob-Tach receiver arms
- Pull both lock handles to engage
- Verify orange indicators show LOCKED
- Test lift 6 inches — do not drive until confirmed locked
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
TMG-SBG72 Skid Steer Round Bale Gripper
Standard FlowThe TMG-SBG72 is a hydraulic round bale gripper for skid steers, built to squeeze and...
View product →
IronBull Skid Steer Pallet Forks
The IronBull Skid Steer Pallet Forks handles palletized loads, lumber bundles, and baled...
View product →More from IronBull
IronBull 72-Inch Angle Broom Skid Steer
Standard FlowIronBull Canada's 72-inch angle broom sweeps and angles material to the side on job sites,...
View product →
IronBull 12-Inch Auger Bit for Skid Steers
High FlowIronBull's 12-inch auger bit is one of the most popular sizes for skid steer auger...
View product → IronBull 18-Inch Auger Bit for Skid Steers
High FlowIronBull's 18-inch auger bit is a large-diameter drilling attachment for skid steers used...
View product → IronBull 24-Inch Auger Bit for Skid Steers
High FlowThe 24-inch-inch auger bit drills post holes, footings, and fence lines in Canadian soil...
View product →✓ Last checked: March 2026