HLA 72-Inch High Dump Skid Steer Bucket

Mid
Standard Flow
Runs on standard auxiliary flowFits most skid steers, including small-frame
View on hlaattachments.com →
HLA 72-Inch High Dump Skid Steer Bucket

Overview

HLA's high dump bucket increases dump height by approximately 48 inches compared to a standard skid steer bucket — allowing material to be placed into bins, hoppers, and truck boxes that a standard skid steer cannot reach. Ontario-manufactured by Horst Welding. Features soft-stop cylinders to reduce vibration and HD buffers. Available from 60 to 96-inch widths. Particularly useful for Canadian aggregate, composting, and waste operations.

Canada Availability

Canadian-manufactured by Horst Welding (Listowel, ON). Available through HLA dealers and Langner Equipment. Pricing on application.

Key Facts

  • Working width: 72 inches (available 60"–96")
  • Dump height increase: 48 inches above standard
  • Soft-stop cylinders for smooth operation
  • HD buffers standard
  • Application: bins, hoppers, truck box loading
  • Ontario-manufactured by Horst Welding
  • SSQA skid steer quick attach
  • Typical weight: 430–560 lbs (varies by manufacturer)
  • Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
Specs sourced from hlaattachments.com · Last verified: March 2026

Is This Right For You?

Buy if

  • You move high-volume, low-density material: mulch, wood chips, snow, or loose compost
  • You want more cubic yards per pass without exceeding your machine's weight limit

Skip if

  • Your material is heavy (gravel, soil, rock) — the thin bucket walls will wear fast
  • You need a bucket that doubles for digging or grading

Also consider

  • GP bucket if you split time between light and heavy material
  • Snow pusher if snow moving is your primary winter task
Machine Compatibility

Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.

About HLA in Canada

HLA Attachments is an Ontario-based manufacturer that designs and builds attachments in Waterloo, ON, with a dealer network spanning all provinces. Backed by a Canadian warranty and local parts availability, HLA is one of the most trusted names on Canadian job sites.

Care & Maintenance

  • Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
  • Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
  • Check coupler latch engagement before every use — a partially latched bucket can release under load
  • Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
  • Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late

How to Connect

  1. Position bucket face-down on ground
  2. Drive forward into Bob-Tach receiver arms
  3. Pull both lock handles to engage
  4. Verify orange indicators show LOCKED
  5. Test lift 6 inches — do not drive until confirmed locked
Safety NoteBob-Tach / Bob-Lock verification is critical — look for orange indicator pins fully engaged

Ready to Buy in Canada?

Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.

Find a Dealer Near You →

✓ Last checked: March 2026