HLA 96-Inch Grain Bucket for Large Skid Steers

Mid
No hydraulics requiredFits most skid steers, including small-frame
View on hlaattachments.com →
HLA 96-Inch Grain Bucket for Large Skid Steers

Overview

The 96-inch-inch bucket is purpose-built for skid steers and compact track loaders working in grain handling, feed, agricultural material. HLA Attachments, headquartered in Elmira, Ontario, is one of Canada's largest domestic attachment manufacturers, with wide dealer coverage across the country. Features a replaceable cutting edge and universal SSQA mount for broad machine compatibility. Available in Canada through HLA Attachments dealers. Ontario-manufactured.

Canada Availability

Available in Canada through HLA Attachments dealers. Ontario-manufactured.

Key Facts

  • Working width: 96 inches
  • Type: grain/feed bucket
  • Application: grain handling, feed, agricultural material
  • Mount: universal SSQA
  • Typical weight: 600–800 lbs (varies by manufacturer)
  • Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
Specs sourced from hlaattachments.com · Last verified: March 2026

Is This Right For You?

Buy if

  • You move high-volume, low-density material: mulch, wood chips, snow, or loose compost
  • You want more cubic yards per pass without exceeding your machine's weight limit

Skip if

  • Your material is heavy (gravel, soil, rock) — the thin bucket walls will wear fast
  • You need a bucket that doubles for digging or grading

Also consider

  • GP bucket if you split time between light and heavy material
  • Snow pusher if snow moving is your primary winter task
Machine Compatibility

Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.

About HLA in Canada

HLA Attachments is an Ontario-based manufacturer that designs and builds attachments in Waterloo, ON, with a dealer network spanning all provinces. Backed by a Canadian warranty and local parts availability, HLA is one of the most trusted names on Canadian job sites.

Care & Maintenance

  • Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
  • Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
  • Check coupler latch engagement before every use — a partially latched bucket can release under load
  • Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
  • Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late

How to Connect

  1. Position bucket face-down on ground
  2. Drive forward into Bob-Tach receiver arms
  3. Pull both lock handles to engage
  4. Verify orange indicators show LOCKED
  5. Test lift 6 inches — do not drive until confirmed locked
Safety NoteBob-Tach / Bob-Lock verification is critical — look for orange indicator pins fully engaged

Ready to Buy in Canada?

Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.

Find a Dealer Near You →

✓ Last checked: March 2026