Baumalight Roughneck RC582 Planetary Auger Drive

Premium
Standard Flow
Runs on standard auxiliary flowFits most skid steers, including small-frame
View on tagequipment.ca →
Baumalight RC582 auger drive unit

Overview

The RC582 is Baumalight's mid-range planetary auger drive — a step up from the gear-driven RC442 in torque and versatility. It handles 6–24 GPM, which covers standard and light high-flow machines. The planetary drive system delivers stronger, more consistent torque than gear-drives in tougher soils — useful in Canadian prairie clay and glacial till that slow down lighter augers. At 245 lbs it's compact for a planetary unit. Available with either a 2-inch hex or 2 9/16-inch round output shaft depending on your bit selection. Stocked and sold in Canada through Tag Equipment.

Canada Availability

Available in Canada through Tag Equipment (Ontario-based, ships across Canada).

Best for: post holes, fencing, landscaping, utility work in varied soil conditions

Compare with: Baumalight 10 Inch Skid Steer Auger Bit · Baumalight 12 Inch Skid Steer Auger Bit · Baumalight 18 Inch Skid Steer Auger Bit

Key Facts

  • Drive type: planetary
  • Hydraulic flow: 6–24 GPM (max 25 GPM)
  • Hydraulic pressure: 1,500–3,000 PSI (max 3,300 PSI)
  • Output shaft: 2-inch hex or 2 9/16-inch round (option)
  • Gear ratio: 3.6:1
  • Weight: 245 lbs (without auger bit)
  • Application: post holes, fencing, landscaping, utility work in varied soil conditions
  • Compatible with most skid steers via universal mount
Specs sourced from tagequipment.ca · Last verified: March 2026

Is This Right For You?

Buy if

  • You drill post holes, footings, or tree holes regularly enough that buying beats renting
  • Your skid steer's hydraulic output is matched to the drive unit — verify GPM range before buying

Skip if

  • You only drill occasionally — renting an auger package for $250–$400/day often wins over ownership at $3,000–$8,000 investment
  • Your machine's GPM is outside the drive unit's rated range — running outside spec damages the motor

Also consider

  • A rental package first to confirm the right drive unit spec for your soil and machine
  • Auger bits in multiple diameters — the drive unit investment only makes sense if you have the right bits to go with it
Machine Compatibility

Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid-frame machines (S450–S650 class) are the most common fit.

About Baumalight in Canada

Baumalight is a Canadian manufacturer based in Ontario, producing forestry and land clearing attachments for Canadian conditions. Buying Baumalight means buying Canadian — local warranty support, parts, and engineering.

Care & Maintenance

  • Grease the drive unit gearbox per the manufacturer's schedule — typically every 8 hours of operation; a starved gearbox is the most common cause of drive unit failure
  • Inspect bit carbide teeth after every use in rocky or abrasive soil — worn or chipped teeth increase drive unit load and reduce penetration
  • Replace a worn pilot bit before the main teeth wear — the pilot centers the bit and prevents wobble that stresses the drive unit gearbox
  • Check hydraulic hose connections at the drive unit before each use — hose chafing in tight soil is a common failure point
  • Store bits vertically or with exposed carbide protected — storing lying flat with unprotected carbide causes chipping from incidental contact

How to Connect

  1. Attach auger drive head using Bob-Tach
  2. Connect high-flow hydraulic couplers (colour-coded on most brands)
  3. Verify rotation direction — auger should rotate clockwise when viewed from above
  4. Lower auger to ground and test rotation at idle before digging
Safety NoteAugers typically require 15-35 GPM — verify your machine's aux hydraulic flow before connecting

Ready to Buy in Canada?

Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.

Find a Dealer Near You →

✓ Last checked: March 2026